Single Mast Aluminum Alloy Lift Platform
The self-developed integral built-in sliding block is used between each mast, so that the dynamic gap between the masts is small, and it runs when lifting more stable and reliable, far better than ordinary independent guide wheel support structure;
|
Single Mast ALUMINUM ALLOY LIFT PLATFORM |
||||||
|
Model |
GTWY1-5 |
GTWY1-6 |
GTWY1-8 |
GTWY1-9 |
GTWY1-10 |
GTWY1-12 |
|
Platform |
||||||
|
Max. Working Height |
6.7m |
8.2m |
9.8m |
11.2m |
12.4m |
14m |
|
Max. Platform Height |
4.7m |
6.2m |
7.8m |
9.2m |
10.4m |
12m |
|
Loading Capacity |
150kg |
150kg |
150kg |
150kg |
136kg |
120kg |
|
Occupants |
1 |
1 |
1 |
1 |
1 |
1 |
|
Platform Dimension |
0.67m x 0.66m |
0.67m x 0.66m |
0.67m x 0.66m |
0.67m x 0.66m |
0.67m x 0.66m |
0.67m x 0.66m |
|
Overall Dimension |
||||||
|
Overall Height |
1.99m |
1.99m |
1.99m |
1.99m |
1.99m |
2.68m |
|
Overall Width |
0.74m |
0.74m |
0.74m |
0.74m |
0.74m |
0.81m |
|
Overall Length |
1.24m |
1.24m |
1.36m |
1.4m |
1.42m |
1.46m |
|
Outrigger coverage |
1.7m x 1.7m |
1.7m x 1.7m |
1.6m x 1.6m |
1.7m x 1.7m |
1.9m x1.7m |
2.3m*1.9m |
|
Weight |
||||||
|
AC |
300kg |
320kg |
345kg |
365kg |
385kg |
460kg |
|
DC |
335kg |
355kg |
380kg |
400kg |
420kg |
495kg |
|
Power |
||||||
|
AC |
380V/220V/110V |
380V/220V/110V |
380V/220V/110V |
380V/220V/110V |
380V/220V/110V |
380V/220V/110V |
|
AC Motor |
0.75KW |
0.75KW |
0.75KW |
0.75KW |
0.75KW |
0.75KW |
|
DC |
12V |
12V |
12V |
12V |
12V |
12V |
|
DC motor |
1.5KW |
1.5KW |
1.5KW |
1.5KW |
1.5KW |
1.5KW |
|
Charger |
12V/15A |
12V/15A |
12V/15A |
12V/15A |
12V/15A |
12V/15A |
Feature
1. The mast material is made of high-strength aviation aluminum to ensure the absolute safety of the operators.
2. The self-developed integral built-in sliding block is used between each mast, so that the dynamic gap between the masts is small, and it runs when lifting more stable and reliable, far better than ordinary independent guide wheel support structure;
3. The four-wheel rolling chassis is adopted on the site, which can walk easily even in corners and narrow and difficult areas.
4. The guardrail adopts lifting installation, and there are sliding bars between the guardrails, which is convenient for personnel to get on and off.
5. There is a spirit level on the chassis to easily ensure that the machine is in a horizontal position. Suction cup type leveling legs with level indicator are always platform provide solid and stable ground support, even on slightly uneven ground;
6. Adopt American Curtis dual control switch, the platform can be operated independently up and down
7. There is an emergency stop switch on the platform to prevent equipment failure and ensure the absolute safety of personnel
8. There is an emergency lowering device under the platform, even if the platform loses power accidentally, it can ensure that the platform descends slowly and relieve the operator the worries of the future, safer to use.
9. The 100% pilot valve controls the gap, which further improves the matching degree between the masts, so that the left and right shaking of the high-altitude platform is small. Technology meets EU CE standards
Problems that should paid attention to in the safe use of aluminum alloy lift
There may be some accidents during the use of aluminum alloy lifts. Only by taking precautions can we effectively prevent these accidents from happening. In the process of using the aluminum alloy elevator, we should always pay attention to whether the protective measures of the aluminum alloy elevator are operating normally, and find the problem and deal with it in time.





Hot Tags: single mast aluminum alloy lift platform, China single mast aluminum alloy lift platform manufacturers, suppliers, factory, aerial scissor lift platform, , aerial work scissor lift platform, foldable electric scaffolding lift platform, Four Mast Aluminum Alloy Lift Platform, Three Mast Aluminum Alloy Lift Platform
Previous
No InformationYou Might Also Like
Send Inquiry











