Why aluminum alloy aerial lifts are widely used

When charging, do not unplug the battery or turn off the power switch, otherwise the plug and electrical parts will be damaged.Only after the charging mechanism is closed, can the plug be pulled out. When the transport vehicle is equipped with electrolyte, do not pour water into the sulfuric acid, so as to avoid a sudden increase in the temperature of the liquid level and splashing of boiling acid droplets.

In any case, the electrolyte temperature should not exceed 45°C during the charging process, otherwise it should be cooled as much as possible, such as reducing the charging current, taking measures such as artificial cooling or suspending charging, and then charging after the temperature drops again.

Different types of charger output parameters are set differently, the specific method should follow the instructions of the charger.Electric forklift should check whether the wires and sockets are damaged before using the power supply.If there is damage, it should be repaired and replaced before charging.

Check whether the battery is in good condition, whether the wiring is in good condition, open the charging valve, observe whether the electrolyte meets the requirements of the liquid level height, add distilled water if necessary, and inject ADVIS with the liquid level 15~20 mm higher than the protective sheet.